Pembuatan Alat Monitoring Infus Berbasis NodeMCU ESP8266

Siti Nur Khasanah; Maisyaroh Maisyaroh; Ade Nugraha; Mohamad Ulinnuha

doi:10.35316/jimi.v6i2.1472

Siti Nur Khasanah Universitas Nusa Mandiri
Maisyaroh Maisyaroh Universitas Bina Sarana Informatika
Ade Nugraha Universitas Bina Sarana Informatika
Mohamad Ulinnuha Universitas Bina Sarana Informatika

10.35316/jimi.v6i2.1472

Keywords: Monitoring Tool, Infusion, NodeMCU, Infrared

Abstract

The problem of late replacement of infusion mattresses for patients in a medical institution is still common today. It still helps him closely with the nurses' negligence in monitoring the patient's infusion condition. This condition is very dangerous for the patient's health. Therefore the making of infusion monitoring equipment based on NodeMCU esp8266. This tool works by relying on the results of sensor readings that are inserted into the microcontroller which will be processed by NodeMCU. The sensor used in making this system is the sensor module, the sensor reading sensor is the intended emission sensor - in this case, means the drip drops, the sensor will count the number of drops. From the number of drops, it can be used to count the drip infusion. In this study, it can be concluded that the NodeMCU ESP 8266-based infusion monitoring tool using the IR Obstacle sensor component has been successfully made through the functionality test process.

Downloads

Download data is not yet available.

References

N. Lestari et al., “Rancang Bangun Sistem Monitoring Sisa Cairan Iinfus dan Monitoring Aliran Infus Berbasis Arduino Di Puskesmas Muara Beliti,” Pros. SNATIF, vol. 2, no. 1, pp. 21–27, 2017.

D. Nataliana, N. Taryana, and E. Riandita, “Alat Monitoring Infus Set pada Pasien Rawat Inap Berbasis Mikrokontroler ATmega 8535,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 4, no. 1, p. 1, 2018.

I. Halifatullah, D. H. Sulaksono, and T. Tukadi, “Rancang Bangun Sistem Monitoring Dan Kontrol Infus Dengan Penerapan Internet of Things (IoT) Berbasis Android,” POSITIF J. Sist. dan Teknol. Inf., vol. 5, no. 2, p. 81, 2019, doi: 10.31961/positif.v5i2.740.

Ruslan Agussalim, “Monitoring Cairan Infus Berdasarkan Indikator Kondisi,” J. Ilm. Ilk., vol. 8, no. Desember, pp. 145–152, 2016.

T. Kusuma and M. T. Mulia, “Perancangan Sistem Monitoring Infus Berbasis Mikrokontroler Wemos D1 R2,” Knsi 2018, pp. 1422–1425, 2018.