Analisis Kinerja Protokol MQTT dan HTTP Pada Akuisisi Data Magnet Berbasis Internet of Things

Hairatunnisa Hairatunnisa; Hapsoro Agung Nugroho; Relly Margiono

doi:10.35316/jimi.v6i2.1351

Hairatunnisa Hairatunnisa Badan Meteorologi Klimatologi dan Geofisika
Hapsoro Agung Nugroho Sekolah Tinggi Meteorologi Klimatologi dan Geofisika
Relly Margiono Sekolah Tinggi Meteorologi Klimatologi dan Geofisika

10.35316/jimi.v6i2.1351

Keywords: MQTT, HTTP, Protocol, Internet of Things, Magnetic Data

Abstract

One of the determinants of the quality of magnetic data is continuous data, so we need a data transmission system that can continuously transmit observational data. In this research, a magnetometer communication system design was carried out with the concept of the Internet of Things (IoT) using the MQTT and HTTP protocol, where measurement data in the form of the x-axis, y-axis, z-axis, horizontal components, and total magnetic field components are displayed on the dashboard in real time and continuously. Testing the performance of sending data is done using the Wireshark, it is known that the MQTT protocol has a better delivery quality compared to the HTPP protocol with an average delay value of 0.0120 seconds, an average value of packet length of 54 bytes and a packet loss value of 0.11%, while the HTTP protocol has an average delay value of 0.0257 seconds, an average packet length value of 268.1 bytes and a packet loss value of 0.5%.

Downloads

Download data is not yet available.

References

A. Winarko, M. Ruhimat, M. A. A. Biyantoro, S. Sulimin, and S. Suwardi, “Analisis Perubahan Komponen Medan Magnet Bumi Pada Saat Gerhana Matahari Total 9 Maret 2016 Di Ternate,” Spektra J. Fis. dan Apl., vol. 1, no. 1, pp. 1–8, 2016.

R. Iskandar, “Analisis Sistem Informasi Meteorologi Klimatologi dan Geofisika di Stasiun BMKG kelas 1 Bandung,” J. TEDC, vol. 11, no. 1, pp. 71–76, 2019.

E. Welker and J. Reda, “Magnetic measurements, apparatus and metrology,” Geoinf. Issues, vol. 8, no. 1, pp. 19–24, 2016.

G. H. Cahyono, “Internet Of Things (Sejarah, Teknologi dan Penerapannya),” Swara Patra, vol. 6, no. 3, 2016.

R. C. J. Wydmann and R. Mukhaiyar, “Augmented Reality dalam Penggunaan Alat Rumah Tangga Berbasis Internet Of Things,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, pp. 84–91, 2020.

I. E. Putra, I. A. D. Giriantari, and L. Jasa, “Monitoring penggunaan daya listrik sebagai implementasi internet of things berbasis wireless sensor network,” Maj. Ilm. Teknol. Elektro, vol. 16, no. 3, p. 50, 2017.

W. Wilianto and A. Kurniawan, “Sejarah, cara kerja dan manfaat internet of things,” Matrix J. Manaj. Teknol. Dan Inform., vol. 8, no. 2, pp. 36–41, 2018.

R. Dismantoro, A. Kusyanti, and M. Data, “Implementasi Algoritme Lizard untuk Pengamanan Protokol MQTT pada Perangkat NodeMCU,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2548, p. 964X, 2018.

R. A. Atmoko, Dasar Implementasi Protokol MQTT Menggunakan Python dan NodeMCU. Mokosoft Media, 2019.

F. Vinola, A. Rakhman, and S. Sarjana, “Sistem Monitoring dan Controlling Suhu Ruangan Berbasis Internet of Things,” J. Tek. Elektro dan Komput., vol. 9, no. 2, pp. 117–126, 2020.

C. F. Permatasari and H. Dhika, “Optimasi Jalur Transfer Data dari HTTP menjadi MQTT pada IoT menggunakan Cloud Services,” JISA (Jurnal Inform. dan Sains), vol. 1, no. 2, pp. 67–72, 2018.

E. F. D. Permatasari, A. G. Putra, and M. Abdurohman, “Analisis Perbandingan Performansi MQTT dan HTTP pada Platform IoT Node-Red,” eProceedings Eng., vol. 6, no. 2, 2019.

D. I. Saputra, G. M. Karmel, and Y. B. Zainal, “Perancangan Dan Implementasi Rapid Temperature Screening Contactless Dan Jumlah Orang Berbasis Iot Dengan Protokol Mqtt,” J. Energy Electr. Eng., vol. 2, no. 1, 2020.

K. Nugroho and M. S. Fallah, “Implementasi Load Balancing menggunakan Teknologi EtherChannel pada Jaringan LAN,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 6, no. 3, p. 420, 2018.